PTFE heat shrink tubing / heat shrink sleeves
These PTFE heat shrink tubes can shrink back by heating them. Usually this is done with a heat gun or with a paint burner. Due to the shrinkage, the sleeve can be tightly wrapped around the wire or item for extra protection against external influences or to insulate the wire.
We have the following sizes in stock:
Filters Sort results
Reset Apply
 | PTFE heat shrink sleeve - AWG6100% pure PTFE material 7.6 mm before shrinkage – 4.41 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG8100% pure PTFE material 6.1 mm before shrinkage – 3.53 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG10100% pure PTFE material 4,8 mm before shrinkage - 2,84 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG12100% pure PTFE material 3,8 mm before shrinkage - 2,31 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG14100% pure PTFE material 3,0 mm before shrinkage - 1,83 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG18100% pure PTFE material 1,9 mm before shrinkage - 1,17 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG20100% pure PTFE material 1,5 mm before shrinkage - 0,97 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG16100% pure PTFE material 2,3 mm before shrinkage - 1,47 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG22100% pure PTFE material 1,4 mm before shrinkage - 0,81 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG24100% pure PTFE material 1,2 mm before shrinkage - 0,66 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG26100% pure PTFE material 1,1 mm before shrinkage - 0,53 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG28100% pure PTFE material 0,9 mm before shrinkage - 0,46 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG30100% pure PTFE material 0,8 mm before shrinkage - 0,38 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG4100% pure PTFE material 9,4 mm before shrinkage - 5,53 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG2100% pure PTFE material 10,9 mm before shrinkage - 6,93 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces | |
| PTFE heat shrink sleeve - AWG0100% pure PTFE material 11,9 mm before shrinkage - 8,69 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces |
If the right diameter PTFE heat shrink tubing for your application is not available, please contact our sales department to discuss the possibilities.
In addition to the above overview of conductive PTFE tubes, we can supply almost all diameters. If you are looking for a different size, please contact us so we can send you a suitable quote.