PTFE heat shrink tubing / heat shrink sleeves

These PTFE heat shrink tubes can shrink back by heating them. Usually this is done with a heat gun or with a paint burner. Due to the shrinkage, the sleeve can be tightly wrapped around the wire or item for extra protection against external influences or to insulate the wire.
We have the following sizes in stock:

Showing 1 – 16 of 16 results Showing all 16 results Showing the single result No results found


	PTFE heat shrink sleeve – AWG6 – 7.6 mm before shrinkage – 4.41 mm after shrinkage PTFE heat shrink sleeve - AWG6 100% pure PTFE material 7.6 mm before shrinkage – 4.41 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG8 – 6,1 mm before shrinkage – 3,53 mm after shrinkage PTFE heat shrink sleeve - AWG8 100% pure PTFE material 6.1 mm before shrinkage – 3.53 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG10 – 4,8 mm before shrinkage – 2,84 mm after shrinkage PTFE heat shrink sleeve - AWG10 100% pure PTFE material 4,8 mm before shrinkage - 2,84 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG12 – 3,8 mm before shrinkage – 2,31 mm after shrinkage PTFE heat shrink sleeve - AWG12 100% pure PTFE material 3,8 mm before shrinkage - 2,31 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG14 – 3,0 mm before shrinkage – 1,83 mm after shrinkage PTFE heat shrink sleeve - AWG14 100% pure PTFE material 3,0 mm before shrinkage - 1,83 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG18 – 1,9 mm before shrinkage – 1,17 mm after shrinkage PTFE heat shrink sleeve - AWG18 100% pure PTFE material 1,9 mm before shrinkage - 1,17 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG20 – 1,5 mm before shrinkage – 0,97 mm after shrinkage PTFE heat shrink sleeve - AWG20 100% pure PTFE material 1,5 mm before shrinkage - 0,97 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG16 – 2,3 mm before shrinkage – 1,47 mm after shrinkage PTFE heat shrink sleeve - AWG16 100% pure PTFE material 2,3 mm before shrinkage - 1,47 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG22 – 1,4 mm before shrinkage – 0,81 mm after shrinkage PTFE heat shrink sleeve - AWG22 100% pure PTFE material 1,4 mm before shrinkage - 0,81 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG24 – 1,2 mm before shrinkage – 0,66 mm after shrinkage PTFE heat shrink sleeve - AWG24 100% pure PTFE material 1,2 mm before shrinkage - 0,66 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG26 – 1,1 mm before shrinkage – 0,53 mm after shrinkage PTFE heat shrink sleeve - AWG26 100% pure PTFE material 1,1 mm before shrinkage - 0,53 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG28 – 0,9 mm before shrinkage – 0,46 mm after shrinkage PTFE heat shrink sleeve - AWG28 100% pure PTFE material 0,9 mm before shrinkage - 0,46 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG30 – 0,8 mm before shrinkage – 0,38 mm after shrinkage PTFE heat shrink sleeve - AWG30 100% pure PTFE material 0,8 mm before shrinkage - 0,38 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG4 – 9,4 mm before shrinkage – 5,53 mm after shrinkage PTFE heat shrink sleeve - AWG4 100% pure PTFE material 9,4 mm before shrinkage - 5,53 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG2 – 10,9 mm before shrinkage – 6,93 mm after shrinkage PTFE heat shrink sleeve - AWG2 100% pure PTFE material 10,9 mm before shrinkage - 6,93 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product
	PTFE heat shrink sleeve – AWG0 – 11,9 mm before shrinkage – 8,69 mm after shrinkage PTFE heat shrink sleeve - AWG0 100% pure PTFE material 11,9 mm before shrinkage - 8,69 mm after shrinkage Shipping within 24 hours Also available in cut-to-size pieces	See product

If the right diameter PTFE heat shrink tubing for your application is not available, please contact our sales department to discuss the possibilities.

In addition to the above overview of conductive PTFE tubes, we can supply almost all diameters. If you are looking for a different size, please contact us so we can send you a suitable quote.

Order full roll(s) of PTFE tube

Cut to size tubes

PTFE heat shrink tubing / heat shrink sleeves

PTFE heat shrink tubing / heat shrink sleeves

PTFE heat shrink sleeve – AWG6 – 7.6 mm before shrinkage – 4.41 mm after shrinkage

PTFE heat shrink sleeve - AWG6

PTFE heat shrink sleeve – AWG8 – 6,1 mm before shrinkage – 3,53 mm after shrinkage

PTFE heat shrink sleeve - AWG8

PTFE heat shrink sleeve – AWG10 – 4,8 mm before shrinkage – 2,84 mm after shrinkage

PTFE heat shrink sleeve - AWG10

PTFE heat shrink sleeve – AWG12 – 3,8 mm before shrinkage – 2,31 mm after shrinkage

PTFE heat shrink sleeve - AWG12

PTFE heat shrink sleeve – AWG14 – 3,0 mm before shrinkage – 1,83 mm after shrinkage

PTFE heat shrink sleeve - AWG14

PTFE heat shrink sleeve – AWG18 – 1,9 mm before shrinkage – 1,17 mm after shrinkage

PTFE heat shrink sleeve - AWG18

PTFE heat shrink sleeve – AWG20 – 1,5 mm before shrinkage – 0,97 mm after shrinkage

PTFE heat shrink sleeve - AWG20

PTFE heat shrink sleeve – AWG16 – 2,3 mm before shrinkage – 1,47 mm after shrinkage

PTFE heat shrink sleeve - AWG16

PTFE heat shrink sleeve – AWG22 – 1,4 mm before shrinkage – 0,81 mm after shrinkage

PTFE heat shrink sleeve - AWG22

PTFE heat shrink sleeve – AWG24 – 1,2 mm before shrinkage – 0,66 mm after shrinkage

PTFE heat shrink sleeve - AWG24

PTFE heat shrink sleeve – AWG26 – 1,1 mm before shrinkage – 0,53 mm after shrinkage

PTFE heat shrink sleeve - AWG26

PTFE heat shrink sleeve – AWG28 – 0,9 mm before shrinkage – 0,46 mm after shrinkage

PTFE heat shrink sleeve - AWG28

PTFE heat shrink sleeve – AWG30 – 0,8 mm before shrinkage – 0,38 mm after shrinkage

PTFE heat shrink sleeve - AWG30

PTFE heat shrink sleeve – AWG4 – 9,4 mm before shrinkage – 5,53 mm after shrinkage

PTFE heat shrink sleeve - AWG4

PTFE heat shrink sleeve – AWG2 – 10,9 mm before shrinkage – 6,93 mm after shrinkage

PTFE heat shrink sleeve - AWG2

PTFE heat shrink sleeve – AWG0 – 11,9 mm before shrinkage – 8,69 mm after shrinkage

PTFE heat shrink sleeve - AWG0

Customer service

Best sellers

Recent Posts

Contact